Replacement Refrigerator Water Filter For:
Kenmore W10744238
Filter Features
-
NSF Certified 42 & 53
-
Filter Life: 6 Months
-
Filter Capacity: 200 Gallons
-
Replacement Refrigerator Water Filter For:
W10744238
2-Pack ($35.99)
Save:
$34.00
131 Review
Add To Cart
-
Replacement Refrigerator Water Filter For:
W10744238
3-Pack ($52.99)
Save:
$47.00
179 Review
Add To Cart
-
Replacement Refrigerator Water Filter For:
W10744238
4-Pack ($67.99)
Save:
$52.00
74 Review
Add To Cart
-
Replacement Refrigerator Water Filter For:
W10744238
6-Pack ($99.99)
Save:
$30.00
70 Review
Add To Cart
Reassure your mind to taste the fresh and safe water produced by kenmore w10744238 at Clatterans which delivers various refrigerator filter replacement to fit your current filters, like xxx. The kenmore w10744238 has passed IAPMO certification and tested by NSF/ANSI standard 42, ensuring the durable and safe filter to dispatch drinking water and ice cube every day. Using the first-class activated carbon, w10744238 will ensure to reduce contaminants such as lead, mercury for serving clear, better tasting water and ice for you and your family. Time to change the w10744238 if flow rate is declining.
Fits The Following Series
| 50023 Series |
| 50022 Series |
| 41169 Series |
| 51123 Series |
| 50029 Series |
Kenmore Refrigerator Models
-
72382
-
72383
-
72389
-
73002
-
73003
-
73009
-
79403
-
79472
-
79473
-
10673002510
-
10673002511
-
10673003510
-
10673003511
-
10673009510
-
10673009511
-
10679402410
-
10679403410
-
10679472410
-
10679472411
-
10679473410
-
10679473411
-
59672382410
-
59672382411
-
59672382413
-
59672383410
-
59672383411
-
59672383413
-
59672389410
-
59672389411
-
59672389412
-
59672389413
-
59673002510
-
59673003510
-
59673009510
-
72382
-
72383
-
72389
-
73002
-
73003
-
73009
-
79403
-
79472
-
79473
-
10673002510
-
10673002511
-
10673003510
-
10673003511
-
10673009510
-
10673009511
-
10679402410
-
10679403410
-
10679472410
-
10679472411
-
10679473410
-
10679473411
-
59672382410
-
59672382411
-
59672382413
-
59672383410
-
59672383411
-
59672383413
-
59672389410
-
59672389411
-
59672389412
-
59672389413
-
59673002510
-
59673003510
-
59673009510
1.Locate the accessory packet in the refrigerator and remove the water filter.
2.Take the water filter out of its packaging and remove the cover from the 0-rings. Be sure the 0-rings are still in place after the cover is removed.
NOTE: There may be some water in the filter. Some spilling may occur. Use atowel to wipe up any spills.
3.Align the arrow on the water filter label with the cutout notch in the filter housing and insert the filter into the housing.
4.Turn the filter clockwise until it locks into the housing.
NOTE: If the filter is not correctly locked into the housing, the water dispenser will not operate. Water will not flow from the dispenser.
5.While the compartment door is still open, lift the filter up into the compartment. Then, close the filter compartment door completely.
6.Run water from the dispenser for 5 minutes at .5 gpm(about 2.5 gallons) to clear the system and prevent sputtering.
NOTE: Initial rate may be slower than expected. Full rate should be restored within 24-36 hours.
7.Reset the "replace filter" light, if needed, by holding the reset button for three seconds.
Top customer reviews
-
By Saundra On 2024-04-16 00:00:00
I have to buy it for my fridge. It keeps the water and ice delicious.
-
By Scott Burch On 2024-04-15 00:00:00
Its perfect.
-
By Marcia Nelson On 2024-04-09 00:00:00
Works great, popped right in. Instructions were clear. Would buy again
-
By Ann Hewitt On 2024-04-06 00:00:00
The filter is easy to install.
-
By Annette On 2024-04-05 00:00:00
Easy to change and keep your water systems clean
-
By Johnathon Bruton On 2024-04-02 00:00:00
No issue
How often should you replace your water filter?
- On average, most filters last 6 months or 300 gallons depending on your water quality and usage.
How do I turn off my filter light to reset?
- If the filter light will not reset after following specific instructions from your owner manual, contact your refrigerator manufacturer.
Do the gaskets (o-rings) on the filters need to be lubricated?
- Most water filters come with pre-lubricated O-rings
- If you are having trouble installing the filter, we have found that a small amount of vegetable oil applied to the O-ring will ease installation and removal of the filter.
I just installed my filter; do I need to run water through it before I drink the water? If so, how much?
- You should run 3 gallons of water through your filter in order to flush it and make sure that it is thoroughly wet. Do not run the 3 gallons continuously, instead run the water for a few minutes and stop in between. Get a gallon water container, and pour and refill 3 times!
LOG IN
Cart
My Account
Track My Order
Contact Us
FAQ
