Maytag MSB26C6MDE
Fits The Following Models
Maytag Refrigerator Models
-
MFF2055DRE
-
MFF2055DRH
-
MFF2055DRM
-
MFW2055DRE
-
MFW2055DRH
-
MFW2055DRM
-
MSB26C6MDE
-
MSB26C6MDH
-
MSB26C6MDM
-
MSC21C6MDM
-
MSF21D4MDE
-
MSF21D4MDH
-
MSF21D4MDM
-
MSF25D4MDE
-
MSF25D4MDH
-
MSF25D4MDM
-
MFF2055DRE
-
MFF2055DRH
-
MFF2055DRM
-
MFW2055DRE
-
MFW2055DRH
-
MFW2055DRM
-
MSB26C6MDE
-
MSB26C6MDH
-
MSB26C6MDM
-
MSC21C6MDM
-
MSF21D4MDE
-
MSF21D4MDH
-
MSF21D4MDM
-
MSF25D4MDE
-
MSF25D4MDH
-
MSF25D4MDM
1. Locate the water filter in the top-right corner of the refrigerator compartment and open the cover door. The filter will be released and then be ejected as the door is opened.
2. When the door is completely open, pull the filter straight out.
NOTE: There may be some water in the filter. Some spilling may occur. Use a towel to wipe up any spills.
3. Take the new filter out of its packaging and remove the covers from the O-rings. Be sure the O-rings are still in place after the covers are removed.
4. With the arrow pointing to the left (toward the filter cover door’s hinge), align the new filter with the filter housing and slide it into place. The filter cover door will automatically begin to close as the new filter is inserted.
5. Close the filter cover door completely in order to snap the filter into place. You may need to press hard.
6. Run water from the dispenser for 5 minutes at .5 gpm (about 2½ gallons) to clear the system and prevent sputtering.
NOTE: Initial rate may be slower than expected. Full rate should be restored within 24-36 hour
7. Reset the “replace filter” light, if needed, by holding the reset button for three seconds.
Top customer reviews
-
By Hope On 2018-04-04 09:49:05
Great filter. lived up to expectations. Love its affordable price and simple installation. I've ordered twice.
-
By Mercedes On 2018-04-03 10:42:09
This is an excellent water filter. They last about 6 months and do an excellent job. They are easy to install, well-priced and fit my fridge perfectly.
-
By Brandy On 2018-04-03 07:15:55
Taste is much better since replacing! Cheaper than those I shopped at other stores.
-
By Dorothy On 2018-04-02 06:51:03
Needed a replacement for my old Kenmore 9930 water filter. I bought it and it's less than what I paid at stores. It also works very well!
-
By Rickey On 2018-03-31 06:12:17
Product was received on time. Followed the directions to filter out the galloons specified before drinking the water. I had no problems, and the water tastes great. Will buy it again.
-
By Boyd On 2018-03-31 01:41:09
We bought this Whirlpool filter 1 to replace the old one. It's no issues with installation and fits our fridge, but the shipping is not as far as I expected...
How often should you replace your water filter?
- On average, most filters last 6 months or 300 gallons depending on your water quality and usage.
How do I turn off my filter light to reset?
- If the filter light will not reset after following specific instructions from your owner manual, contact your refrigerator manufacturer.
Do the gaskets (o-rings) on the filters need to be lubricated?
- Most water filters come with pre-lubricated O-rings
- If you are having trouble installing the filter, we have found that a small amount of vegetable oil applied to the O-ring will ease installation and removal of the filter.
I just installed my filter; do I need to run water through it before I drink the water? If so, how much?
- You should run 3 gallons of water through your filter in order to flush it and make sure that it is thoroughly wet. Do not run the 3 gallons continuously, instead run the water for a few minutes and stop in between. Get a gallon water container, and pour and refill 3 times!
Live Customer Support
Our hours of operation are Monday thru Friday from 8:00am to 6:00pm Eastern Time and our after hours sales team is available 24 hours a day, 7 days a week. Whether it’s placing an order or answering questions that may help in your purchasing decisions, our specialists are ready to assist you. You can also contact us via email.